UP-2003 Dual-Column Computerized Universal Testing Machine 1-50kN for Plastic and Metal Tensile Testing

The UP-2003 is a dual-column, PC-controlled universal testing machine for tensile, compression, bend, peel and tear tests on metals, plastics, rubber and composites. Capacity options from 1 kN to 50 kN let you size the frame to the materials you actually test instead of over-specifying.

What separates it from a single-column touch-screen tester is the combination of a stiff dual-column gantry frame and an AC servo drive. The rigid frame keeps machine deflection out of your elongation and modulus results, while the servo drive enables closed-loop control and strain-rate-controlled testing to ISO 6892-1 Method A and GB/T 228.1. The detailed measurement performance, software functions and the full parameter list are set out under Key Features and Technical Specification below.

• Dual-column gantry frame — high axial stiffness keeps frame deflection out of your elongation and modulus data.
• AC servo motor with servo drive controller, not a stepper: closed-loop control on force, displacement, strain, load and time.
• Capacity options from 1 kN to 50 kN — match the machine to your material instead of over-specifying.
• 24-bit AD conversion with 1/100,000 force resolution and stepless amplification: ±0.5% force accuracy, Class 0.5.
• Large-deformation extensometer as standard: 10–1000 mm measuring range at 0.008 mm resolution — built for rubber and high-elongation plastics.
• Five test types on one frame: tensile, compression, bend, peel and tear.
• Automatic break detection and stop, with real-time multi-curve display.
• Automatic calculation of tensile strength, yield strength, elongation, stress at specified elongation and elastic modulus.
• Two-language software: Chinese and English.
• Unit switching among kgf, N, kN, gf and lbf; length in mm, cm and inch.
• Safety: automatic stop at 110% of the set force, over-current and over-voltage protection, upper and lower travel limits.
• Reports exported to common formats for traceability and archiving.

The UP-2003 frame is supplied empty of application-specific assumptions. Select the package that matches your material; each includes the grips, the preset test methods and the standards you need.

Typical packages — confirm the exact contents with us before ordering:

• Metals — wedge grips, GB/T 228.1 / ASTM E8 methods.
• Plastics & Film — flat grips, ASTM D638 / ISO 527 methods.
• Rubber & Elastomers — large-deformation extensometer, ISO 37 methods.
• Adhesives & Peel — peel / 90° fixtures, ASTM D903 methods.

Each package ships with the matching grips, preset methods and applicable standards.