The heat sealing instrument is designed to measure heat sealing temperature, time, pressure, and other parameters of plastic film substrates, flexible packaging composite films, coated paper, and other heat sealing composite films using the hot pressing sealing method. This provides accurate heat sealing test indicators for quality control and research applications.
| Model Number | UP-5018 |
|---|---|
| Supply Voltage | AC220V 50HZ |
| Heat Seal Temperature | Room temperature +10°C to 250°C |
| Temperature Control Accuracy | ±1°C |
| Heat Seal Pressure | Adjustable range from 0 to 0.7Mpa |
| Heat Sealing Time | Adjustable range from 0.01 to 99.99s |
| Hot Sealing Surface | 300mm×10mm (other sizes can be customized) |
| Heating Method | Single or double heating; Both upper and lower sealing knives can be switched separately and temperature controlled separately |
| Test Mode | Manual mode/Automatic mode (Manual mode controlled by foot switch, automatic mode controlled by adjustable delay relay) |
| Air Source Pressure | ≤0.7MPa (user-supplied) |
| Test Condition | Standard laboratory environment |
| Main Unit Size | 550×330×460mm (L×B×H) |
| Net Weight | Approximately 30 kg |
| Compliance Standards | QB/T 2358, ASTM F2029, YBB 00122003, etc. |
| Standard Configuration | Host + foot switch + air supply cable + power cable + technical document |
