UP-2000-F Film Tensile & Puncture Tester
The UP-2000-F is a compact single-column universal testing machine built for the mechanical evaluation of plastic films, laminates, flexible packaging and other low-force materials. Driven by a stepper motor through a precision pre-loaded ball screw and controlled via a touch screen, it delivers stable, repeatable loading in both tension and compression.
Multiple test routines — tensile, peel, tear, puncture, constant-elongation tensile and compression — are integrated into one controller, so a single instrument replaces several dedicated testers. Results including maximum force, average value, break point ratio and sampling values are printed directly by an optional thermal printer, making the unit practical for incoming inspection and workshop-side quality control where no PC is available.
| Test | Standard |
|---|---|
| Film & sheeting tensile | ASTM D882, ISO 527-3:2018 |
| Tear resistance (trouser tear) | ASTM D1938-19 |
| Seal strength of flexible packaging | ASTM F88 |
| Rubber tensile | ISO 37 |
| Paper & board tensile | JIS P8113 |
| Item | Specification |
|---|---|
| Model | UP-2000-F |
| Structure | Single-column, desktop |
| Capacity | 100 N / 200 N standard; 50 N / 500 N optional |
| Force Accuracy | ±0.5% of reading, Class 0.5 |
| Force Resolution | 1/50,000 of full scale |
| Displacement Resolution | 0.01 mm |
| Speed Range | 0.1–500 mm/min, stepless |
| Effective Stroke | Approx. 800 mm (grips included) |
| Test Width | Approx. 100 mm |
| Sampling Rate | 200 times/sec |
| Drive System | Stepper motor + precision pre-loaded ball screw |
| Control & Display | HMI touch screen |
| Data Output | Built-in thermal printer, RS232 optional |
| Force Units | N, kN, kgf, gf, lbf, switchable |
| Safety Devices | Overload protection, emergency stop, upper/lower travel limit, leakage protection, automatic return |
| Power Supply | AC 220V 50Hz; AC 110V 60Hz optional |
| Dimensions (L × W × H) | 450 × 450 × 1200 mm |
| Net Weight | Approx. 40 kg |
A: Flexible packaging film, PET film, PE film, BOPP/CPP film, lithium battery separator, composite laminated film and thin coating film. It runs tensile tests as well as tear, puncture and heat-seal strength tests on the same machine.
A: The UP-2000-F uses flat low-pressure side-action grips. The clamping surface is flat and distributes pressure evenly, so the film is not cut or pinched off during clamping — the most common cause of premature failure in thin-film tensile testing.
A: Select capacity from the expected maximum force, not from the sample thickness. Most film and foil tests break well below 100 N, so a 100 N or 200 N load cell is the right choice; a 500 N cell places those forces in the bottom of its measuring range. Reserve 500 N for high-strength laminates and thick sheeting.
A: Yes. Tensile, peel, tear, puncture, constant-elongation tensile and compression routines are all built into the controller. You switch the test mode on the touch screen and fit the matching fixture — puncture fixture and tear fixture are available as options.
A: No. The unit is controlled from the touch screen and prints test reports directly on the built-in thermal printer. PC software is available as an option if you need digital archiving and advanced curve analysis.
A: It is designed for tensile testing to ASTM D882 and ISO 527-3, the references most commonly used for flexible film mechanical properties. Tear testing follows ASTM D1938, and seal strength follows ASTM F88.
A: Yes. The UP-2000-P, UP-2000-M, UP-2000-F and UP-2000-A adopt the same single-column main unit, so you can switch test applications by changing the matched grips and selecting the corresponding preset test program in the touch screen system.
Each machine comes with one set of standard grips only. Additional grips are optional spare parts for separate purchase. Grip replacement will not change the load capacity of the tester, and frequent disassembly of grips may affect specimen alignment and data repeatability.