The heat sealing tester is designed to measure critical parameters including heat sealing temperature, time, and pressure for plastic film substrates, flexible packaging composite films, coated paper, and other heat sealing composite materials. This instrument provides accurate heat sealing test indices through hot pressing sealing methodology.
| Model Number | UP-5018 |
|---|---|
| Supply Voltage | AC220V 50HZ |
| Heat Seal Temperature | Room temperature +10°C to 250°C |
| Temperature Control Accuracy | ±1°C |
| Heat Seal Pressure | Adjustable range from 0 to 0.7Mpa |
| Heat Sealing Time | 0.01 to 99.99 seconds |
| Hot Sealing Surface | 300mm × 10mm (custom sizes available) |
| Heating Method | Single or double heating; independent switching and temperature control for upper and lower sealing knives |
| Test Mode | Manual mode (foot switch controlled) / Automatic mode (adjustable delay relay controlled) |
| Air Source Pressure | ≤0.7MPa (user-supplied) |
| Test Condition | Standard laboratory environment |
| Main Unit Dimensions | 550 × 330 × 460mm (L×B×H) |
| Net Weight | Approximately 30 kg |
| Compliance Standards | QB/T 2358, ASTM F2029, YBB 00122003, etc. |
| Standard Configuration | Host + foot switch + air supply cable + power cable + technical documentation |
We provide comprehensive consultative selling services throughout the entire business process:
