UP-6300 IPX1-6 Waterproof Test Chamber with Six Test Grades in One Chamber, SUS304 Stainless Steel Interior and Programmable 0-999 min Test Time

The UP-6300 is a combined IPX1–IPX6 waterproof test chamber covering vertical drip (IPX1/IPX2), oscillating-tube spray (IPX3/IPX4) and hose-nozzle water jets (IPX5/IPX6) in a single unit. Built to the test methods of IEC 60529 and GB/T 4208, it verifies ingress protection for luminaires, electrical enclosures, electronics and automotive components.

1. Six test grades in one chamber — IPX1/IPX2 drip, IPX3/IPX4 oscillating-tube spray and IPX5/IPX6 water jets. No separate rigs and no re-installation of the sample between grades, resulting in lower capital cost and a smaller footprint.
2. Standard-compliant hydraulics — the R600 mm oscillating tube delivers 1.8 L/min ±5% (IPX3) and 2.6 L/min ±5% (IPX4); 6.3 mm and 12.5 mm nozzles deliver 12.5 ± 0.625 L/min (IPX5) and 100 ± 5 L/min (IPX6). All flows are set manually with the panel-mounted flow meter.
3. Precise, repeatable motion — 0.4 mm spray holes at a 50 mm pitch on the R600 tube; swing speed of 240° back and forth in 4 s or 720° in 12 s; and a precisely adjustable turntable speed of 1–5 r/min.
4. Flexible sample handling — a Ø600 mm turntable carries up to 50 kg, with a 550–1000 mm lifting range and 0° or 15° tilt to reproduce the inclined positions required by IPX2. Continuous, forward/reverse alternating and intermittent rotation modes are all selectable.
5. Built-in safety — leakage, water-shortage and short-circuit protection safeguard both the operator and the sample during unattended long-duration tests.
6. Programmable test time — a 0–999 min timer covers everything from a 2.5 min IPX2 tilted-drip test to a 10 min IPX4 spray cycle.

• Luminaires and lighting fixtures (indoor, outdoor, street and tunnel lighting)
• Electrical enclosures, switch cabinets, junction boxes, connectors and sockets
• Consumer electronics and small household appliances
• Automotive and motorcycle lamps, sensors, control units and wiring components
• Outdoor telecom cabinets, EV charging components and solar junction boxes
• Third-party laboratories, certification bodies and in-house QC laboratories

The IPX1–6 configuration ships in two export plywood cases: approx. 189 × 169 × 213 cm and 279 × 148 × 56 cm. Standard lead time is 20–30 working days after order confirmation. Each unit is delivered with an operation manual, a flow-meter calibration reference and a 12-month warranty. OEM/ODM service and customised oscillating-tube radii, nozzle sets and chamber dimensions are available on request.