خانه /محصولات/اتاق آزمون محیطی/Stainless Steel 304 Thermal Shock Test Chamber with High-definition Display and Rapid Temperature Conversion

Stainless Steel 304 Thermal Shock Test Chamber with High-definition Display and Rapid Temperature Conversion

1 واحد
MOQ
negotiable
قیمت
Stainless Steel 304 Thermal Shock Test Chamber with High-definition Display and Rapid Temperature Conversion
امکانات گالری توضیحات محصول حالا صحبت کن
امکانات
مشخصات
Warranty: 1 Year
Additional Service: Support Customer Customization
Custom Service: OEM,ODM
Color Service: Support Customer Customization
Size Service: Support Customer Customization
Third-Party Calibration Service: Support Customer Customization
Internal Material: Stainless Steel304
External Material: Stainless Steel/Spray Paint
High Temp. Exposure Range*1: +60~ to +200°C
Low Temp. Exposure Range*1: -65 to 0 °C
Temp. Fluctuation *2: ±1.8°C
Specification: Refer to the actual size specifications
Warranty: 1 Year
Additional Service: Support Customer Customization
Custom Service: OEM,ODM
Color Service: Support Customer Customization
Size Service: Support Customer Customization
Third-Party Calibration Service: Support Customer Customization
Internal Material: Stainless Steel304
External Material: Stainless Steel/Spray Paint
High Temp. Exposure Range*1: +60~ to +200°C
Low Temp. Exposure Range*1: -65 to 0 °C
Temp. Fluctuation *2: ±1.8°C
Specification: Refer to the actual size specifications
گارانتی: 1 سال
سرویس اضافی: پشتیبانی از سفارشی سازی مشتری
خدمات سفارشی: OEM، ODM
سرویس رنگ: پشتیبانی از سفارشی سازی مشتری
سرویس اندازه: پشتیبانی از سفارشی سازی مشتری
خدمات کالیبراسیون شخص ثالث: پشتیبانی از سفارشی سازی مشتری
مواد داخلی: فولاد ضد زنگ 304
مواد خارجی: فولاد ضد زنگ / اسپری رنگ
High temp. دمای بالا. exposure range*1 محدوده نوردهی*1: +60 تا +200 درجه سانتیگراد
Low temp. دمای پایین exposure range*1 محدوده نوردهی*1: -65 تا 0 درجه سانتی گراد
Temp. دما fluctuation *2 نوسان *2: ± 1.8 درجه سانتیگراد
مشخصات: به مشخصات اندازه واقعی مراجعه کنید
نام محصول: محفظه تست شوک حرارتی
High temp. دمای بالا. exposure range*1 محدوده نوردهی*1: +60 تا +200 درجه سانتیگراد
Low temp. دمای پایین exposure range*1 محدوده نوردهی*1: -65 تا 0 درجه سانتی گراد
Temp. دما fluctuation *2 نوسان *2: ± 1.8 درجه سانتیگراد
مواد داخلی: فولاد ضد زنگ 304
مواد خارجی: فولاد ضد زنگ / اسپری رنگ
خدمات سفارشی: OEM، ODM
گارانتی: 1 سال
سرویس اضافی: پشتیبانی از سفارشی سازی مشتری
سرویس اندازه: پشتیبانی از سفارشی سازی مشتری
مشخصات: به مشخصات اندازه واقعی مراجعه کنید
برجسته کردن:

Stainless Steel 304 Thermal Shock Test Chamber,High-definition Display Environmental Test Chamber,Rapid Temperature Conversion Temperature Test Chamber

,

High-definition Display Environmental Test Chamber

,

Rapid Temperature Conversion Temperature Test Chamber
اطلاعات اولیه
محل منبع: چین
نام تجاری: YOUBI
گواهی: CE,ISO
شماره مدل: UP-6118
پرداخت
جزئیات بسته بندی: بسته بندی جعبه چوبی صادراتی حرفه ای
زمان تحویل: 5-15 روز کاری
شرایط پرداخت: T/T، D/P، Western Union، Paypal، Money Gram
قابلیت ارائه: 30 واحد در ماه
توضیحات محصول
UP-6118 Robust Durable Thermal Shock Test Chamber
The Climate Thermal Shock Test Chamber is advanced testing equipment designed for environmental testing applications, specifically for temperature testing and thermal shock testing. This chamber is utilized across various industries including electronics, automotive, and aerospace to simulate extreme weather conditions and evaluate product performance and reliability.
Constructed with a high-quality carbon steel outer wall and SUS304 stainless steel inner wall, this chamber provides exceptional thermal insulation and long-term durability. The thermal insulation layer, composed of hard polyurethane foam and glass fiber, ensures stable internal temperatures during testing procedures.
Stainless Steel 304 Thermal Shock Test Chamber with High-definition Display and Rapid Temperature Conversion 0
Key Features
  • High temperature groove, low temperature groove, and test groove are static
  • Shock method utilizes wind path changing to direct high and low temperatures to test area
  • Configurable rotation times and defrost cycles
  • Color touch screen controller for easy operation and stability
  • High temperature accuracy using PID calculation methods
  • Selectable start-move position with high and low temperature rotation
  • Real-time test curve display during operation
  • Two-box structure conversion with fast speed and short recovery time
  • Powerful imported refrigeration compressor for rapid cooling
  • Comprehensive and reliable safety protection systems
  • High reliability design suitable for 24-hour continuous testing
Technical Specifications
Parameter Specification
Size (mm) 600*850*800
Temperature Range High greenhouse: cold ~ +150°C
Low greenhouse: cold ~ -50°C
Temperature Evenness ±2°C
Temperature Conversion Time 10S
Temperature Recovery Time 3min
Material Shell: SUS304 stainless steel plate
Liner: SUS304 stainless steel plate
Refrigeration System Dual reciprocating compressors refrigeration (water-cooled), imports France Taikang compressor group, environmentally friendly refrigerant
Control System Korea imported programmable temperature controller
Temperature Sensor PT 100 *3
Setting Range Temperature: -70.00 to +200.00°C
Resolution Temperature: 0.01°C / Time: 1 MIN
Output Type PID + PWM + SSR Control mode
Simulation Load (IC) 4.5kg
Cooling System Water cooled
Meet the Standard Products satisfy GB, GJB, IEC, MIL, corresponding test standard test methods
Power AC380V/50HZ Three-phase four-wire AC power
Expansion Characteristics Diffuser and return air palate know device detector control/CM BUS (RS-485) remote monitoring management system/Ln2 liquid nitrogen quick cooling control device
Stainless Steel 304 Thermal Shock Test Chamber with High-definition Display and Rapid Temperature Conversion 1 Stainless Steel 304 Thermal Shock Test Chamber with High-definition Display and Rapid Temperature Conversion 2 Stainless Steel 304 Thermal Shock Test Chamber with High-definition Display and Rapid Temperature Conversion 3 Stainless Steel 304 Thermal Shock Test Chamber with High-definition Display and Rapid Temperature Conversion 4 Stainless Steel 304 Thermal Shock Test Chamber with High-definition Display and Rapid Temperature Conversion 5 Stainless Steel 304 Thermal Shock Test Chamber with High-definition Display and Rapid Temperature Conversion 6
Our Service Process
Customer Inquiry Process: Discuss testing requirements and technical details, suggest suitable products, and provide competitive pricing.
Specifications Customization: Create detailed drawings for custom requirements, provide reference photos, and confirm final solutions and pricing.
Production and Delivery: Manufacture according to confirmed requirements, provide production progress photos, conduct calibration, and ensure timely delivery.
Installation and After-Sales: Provide field installation support and comprehensive after-sales service.
Frequently Asked Questions
Are you a Manufacturer? Do you offer after-sales service? How can I ask for that? And how about the warranty?
Yes, we are professional manufacturers of Environmental Chambers, Leather shoe testing equipment, and Plastic Rubber testing Equipment in China. Every machine includes a 12-month warranty after shipment, with free maintenance during this period. We extend an additional 2 months consideration for sea transportation. If your machine requires service, contact us via email or phone. We will diagnose issues through conversation or video chat and provide solutions within 24-48 hours.
What about the delivery term?
Standard machines in stock: 3-7 working days. Custom orders: 15-20 working days after payment. We accommodate urgent requirements with special arrangements.
Do you accept customization services? Can I have my logo on the machine?
Yes, we offer both standard and customized machines according to your specifications. We provide OEM and ODM services, including custom branding with your logo.
How can I install and use the machine?
We provide English operation manuals and videos via email. Most machines ship fully assembled - simply connect power and begin operation. We offer on-site installation assistance when necessary.
برچسب:

تجهیزات تست محیطی,دستگاه تست محیطی,اتاق دمای محیط

Stainless Steel 304 Thermal Shock Test Chamber,High-definition Display Environmental Test Chamber,Rapid Temperature Conversion Temperature Test Chamber

Environmental Temperature Chamber

محصولات توصیه شده
با ما در تماس باشید
تماس با شخص : Jessica
تلفن : 008613422863552
حرف باقی مانده است(20/3000)
در تماس باشید
بخش نانچنگ، جاده گوانتای، خیابان نانچنگ، شهر دونگوان، استان گوانگدونگ، چین
jessica@uby-tech.com
008613422863552
در باره
نمایه شرکت کارخانه تور کنترل کیفیت تماس با ما
محصولات
تجهیزات تست آزمایشگاهیاتاق آزمون محیطیدستگاه تست جهانی همه دسته بندی ها
برای ما ایمیل کنید
نیاز خود را با ما در میان بگذارید. ما بهترین محصولات را با شما متصل خواهیم کرد.
نقشه سایت │ سایت موبایل │ سیاست حفظ حریم خصوصی
چین خوب کیفیت تجهیزات تست آزمایشگاهی فروشنده. © 2026 Dongguan Youbi Test Equipment Co.,Ltd. All Rights Reserved.