| Model | UP-6195 |
|---|---|
| Function | Temperature and humidity testing |
| Temperature and humidity fluctuation | ±0.5ºC; ±2.5%RH |
| Temperature and humidity deviation | ±0.5ºC-±2ºC; ±3%RH(>75%RH); ±5%RH(≤75%RH) |
| Controller resolution | ±0.3ºC; ±2.5%RH |
| Controller brand | Korea TEMI880 |
| Heating Time (RT-HT)ºC/min | 100 | 150 40 | 50 |
| Cooling Time (RT-LT)ºC/min | -20 | -40 | -60 | -70 40 | 50 | 55 | 80 |
| Power supply KW | 4.0 | 6.0 | 6.0 | 6.0 |
| Inner material | SUS 304# steel plate |
| Outside material | SUS 304# steel plate (surface disposing) |
| Thermal insulation material | Thermostability high density chlorine formic acid foam insulator material |
| System wind path round-robin mode | Centrifugal fan-broadband enforce circulation |
| Refrigeration way | Single stage compression refrigeration |
| Refrigerator | Whole sealing piston France Taikang brand Compressor |
| Freezing fluid | R4O4A or USA Dupont environmental protection refrigerant (R23+R404) |
| Condensation way | Forced air cooling or water-cooling |
| Heater | Nichrome heating wire heating |
| Humidifier | Semi-enclosed steam humidification |
| Water-provide way | Full-automatic periodical feeding |
| Standard configuration | 1 Observe window (double-deck cavity toughened glass), 1 50mm test hole in the left, 1 PL inner chamber lamp, 2 clapboards, 1 bag of wet and dry bulb, 3 fuses, 1 power line |
| Safety device | Non-fuse-switch compressor overload, refrigerant high low voltage, over-humidity and temperature protection, Protection switch, fuse stoppage warning system |
| Power | 1φ 220V AC±10% 50/60Hz 3φ 380V AC±10% 50/60Hz |
