|No. 1,Tech 9th Road,High & New Tech Development Zone,Songshan Lake,DongGuan City,Guangdong Provincefirstname.lastname@example.org|
Payment & Shipping Terms:
|Product Name:||Footwear,shoes,Textile,rubber,film,Wood,plstatic,leather,Tensile Strength Tester||Model Name:||HTP-004|
|Brand Name:||HTI||Comply With Standard:||ASTM D751,ASTM D882,ASTM D1117,ASTM D1445,ASTM D1593,ASTM D1683,ASTM D2209|
|Weight:||250kg||Test Speed:||0.01 - 500mm / Min|
|Unit Shift:||N,KN,KGF,N,LBF,unit Of Length: Mm, Cm, Inch Freely Shift Convertible||Capacity:||50kg,100kg,200kg,500kg,1000kg|
|Usage:||Tensile Strength,pull Test, Bending Test, Compession Test,peel Test, Tearing Test,elongation Test|
AC Servo UTM Testing Machine,
Dual Arms Universal Test Machine,
ASTM D751 Tensile Testing Equipment
Universial Test Machine-Tensile Testing Equipment -Compression Test Machine -Pull Tester for footwear products
HTP-004 Dual-Arms Computer Servo Universial Test Machine used for tensile strength,pull test, bending test, compession test,peel test, tearing test,elongation test
This universal machine can do various strength testing in the field of rubber, plastics,chipboards, foam, plastic, film, flexible packaging, pipes, textiles, fibers, nanomaterials, polymers, composite materials, synthetic materials, packaging, paper, wire and cable, fiber optic cable, wirecables, seat belt, seat belt, leather belt, shoes, tape, polymer, copper, spring steel wire, stainless steel, castings, brass, non-ferrous metals, car parts, alloys and other non-metallicmaterials and metallic materials.
The UTM is a versatile and valuable piece of testing equipment that can evaluate materials properties such as tensile strength, elasticity, compression, yield strength, elastic and plastic deformation, bend compression, and strain hardening. tensile, compression, bending, tearing, and 90 ° peel, 180 ° peel, shear adhesion, pull-out strength, an extension of the elongation test.
International famous brand -Japan Mitsubishi Servo System
USA Transcell Brand Force Sensor, Japan Omron Brand electric components
All components pass the aging test,life test and noise test etc.
This UTM use circle-arc tooth synchronous belt deceleration system with the best advantages of high efficiency,long-life use,low noise and maintenance-free.Most of the other manufacturers still use Analog Motor Speed Control method which has the disadvantage of null shift and detuning,it could not reach to absolute zero-speed.
But instead, our UTM uses Phase Locked Loop Impulse Control Method, no null shift,no detuning,and high accuracy ball screw loading.
|Maximum force capacity||200kg,500kg,1000kg,2000kg (choose)|
|Force measurement accuracy||0.5% high accuracy,0.5 class|
|Test stroke||Beam to worktable 1100mm, test stoke 800 including grips,effective test width: 380 mm, or specified per customer|
|Test speed||0.005 - 500mm / min stepless, or specified per customer|
|Display||Test data and curve dynamic display during material testing|
|Auto Zero||System will auto zero once next test start|
|Result Reading||Test data record save and check freely, point reading analyse on curves|
|Motor||AC Servo motor and servo drive controller|
The top-quality range of standard compressive and tensile fixtures includes application-specific options such as jaw size and surface finish to comply with the specifications of international standards. If custom grips are required our in-house application engineers can design and manufacture these to suit your needs.
Contact Person: tonyhkhk